Skip to content

rbmj/612-guillotine

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

58 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Chantilly Robotics Guillotine Drive Code

This project contains FIRST Team 612 Chantilly Robotics' code for driving the 2011 robot, Guillotine.

Notes

As last year's code was entirely written in LabVIEW, this code is a rewrite and a work in progress. Not all functionality is implemented. Additionally, many components of Guillotine are salvaged, so only basic funcitonality is available unless some of the components are reinstalled.

This code also can provide a base for future code on subsequent robots. A fork of this repository can provide a nice foundation for new robot code.

The code may require updates and maintainance as the API and libraries are changed. The WPILib version must be compatible with the image version in order for the kernel to load the user code module.

This code was originally branched off of the 2012 code base and retroactivly adjusted to work with the 2011 robot. The commit it is based off of is 2456a3baea47ccf0545896d48892d5b63337b5b8.

Usage

For now, this project assumes that you already have ucpp installed and configured for your system. The build process is as follows:

$ ucpp init               #run once
$ ucpp configure          #run each time the files in the project have changed
$ make                    #compile and link all code (debug)
$ make DEBUG_MODE=0       #compile and link all code (release)
$ make deploy             #deploy code to robot

For more information regarding ucpp, see 'ucpp.rst'.

Configuring

  • Some configuration is required on the cRIO to get everything to work. First, when imaging it is necessary to select the option for WindRiver C++, and please enable NetConsole (except for in perhaps release builds).

  • Remember that the cRIO runs an ftp server that allows anonymous ftp access.

  • Second, for NetConsole to work ni-rt.ini needs to have the DNS and default gateway set to the router. The default is 10.6.12.1, and, though this works on the field, it will not allow NetConsole to work for debugging. The subnet mask of computer running NetConsole must also be set to 255.0.0.0 (not the more intuitive 255.255.255.0).

    • Again, without these changes, the robot will still DRIVE fine.
  • FOR NOW, the robot REQUIRES version 30 of the firmware. This WILL change come build season, though!

  • Be sure to undo any/all changes to ni-rt.ini before going onto the field!!!

License

All code in this project is licensed under the ISC License (see 'LICENSE.rst') and is Copyright © 2012 Chantilly Robotics unless otherwise noted.

Contributors

A full list of contributors is in 'AUTHORS.rst'.

Thanks

Thanks go out to nikitakit and all the other developers of the ucpp project. Thanks to github for providing hosting of our code. And finally, a big thanks to the entire organization of FIRST.

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published