Skip to content

Composable contracts, models, and functions that allow for modeling of both simple and complex financial instruments

License

Notifications You must be signed in to change notification settings

JuliaActuary/FinanceModels.jl

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

FinanceModels.jl

Stable Dev Build Status Coverage

NOTE: Yields.jl has been re-written to FinanceModels.jl, but existing Yields.jl should be easy to update. See the docs for a migration guide for guidance on updating from the prior version. Existing, pinned/compat code should not be affected as JuliaActuary follows Semantic Versioning for its releases.

FinanceModels.jl provides a set of composable contracts, models, and functions that allow for modeling of both simple and complex financial instruments. The resulting models, such as discount rates or term structures, can then be used across the JuliaActuary ecosystem to perform actuarial and financial analysis.

Additionally, the models can be used to project contracts through time: most basically as a series of cashflows but more complex output can be defined for contracts.

yield_curves

QuickStart

using FinanceModels

# a set of market-observed prices we wish to calibrate the model to
# annual effective unless otherwise specified
q_rate = ZCBYield([0.01,0.02,0.03]);
q_spread = ZCBYield([0.01,0.01,0.01]);

# bootstrap a linear spline yield model
model_rate = fit(Spline.Linear(),q_rate,Fit.Bootstrap());⠀           
model_spread = fit(Spline.Linear(),q_spread,Fit.Bootstrap());

# the zero rate is the combination of the two underlying rates
zero(m_spread + m_rate,1) # 0.02 annual effective rate 

# the discount is the same as if we added the underlying zero rates
discount(m_spread + m_rate,0,3)  discount(0.01 + 0.03,3)   # true

# compute the present value of a contract (a cashflow of 10 at time 3)
present_value(m_rate,Cashflow(10,3)) # 9.15...

Overview of FinanceModels

A conceptual sketch of FinanceModels.jl

Often we start with observed or assumed values for existing contracts. We want to then use those assumed values to extend the valuation logic to new contracts. For example, we may have a set of bond yields which we then want to discount a series of insurance obligations.

In the language of FinanceModels, we would have a set of Quotes which are used to fit a Model. That model is then used to discount a new series of cashflows.

That's just an example, and we can use the various components in different ways depending on the objective of the analysis.

Contracts and Quotes

Contracts are a way to represent financial obligations. These can be valued using a model, projected into a future steam of values, or combined with assumed prices as a Quote.

Included are a number of primitives and convenience methods for contracts:

Existing structs:

  • Cashflow
  • Bond.Fixed
  • Bond.Floating
  • Forward (an obligation with a forward start time)
  • Composite (combine two other contracts, e.g. into a swap)
  • EuroCall
  • CommonEquity

Commonly, we deal with conventions that imply a contract and an observed price. For example, we may talk about a treasury yield of 0.03. This is a description that implies a Quoteed price for an underling fixed bond. In FinanceModels, we could use CMTYield(rate,tenor) which would create a Quote(price,Bond.Fixed(...)). In this way, we can conveniently create a number of Quotes which can be used to fit models. Such convenience methods include:

  • ZCBYield
  • ZCBPrice
  • CMTYield
  • ParYield
  • ParSwapYield
  • ForwardYield

FinanceModels offers a way to define new contracts as well.

Cashflows

A Cashflows obligation are themselves a contract, but other contracts can be considered as essentially anything that can be combined with assumptions (a model) to derive a collection of cashflows.

For example, a obligation that pays 1.75 at time 2 could be represented as: Cashflow(1.75,2).

Models

Models are objects that can be fit to observed prices and then subsequently used to make valuations of other cashflows/contracts.

Yield models include:

  • Yield.Constant
  • Bootstrapped Splines
  • Yield.SmithWilson
  • Yield.NelsonSiegel
  • Yield.NelsonSiegelSvensson

Yield-related functions

The models can be used to compute various rates of interest:

  • discount(curve,from,to) or discount(curve,to) gives the discount factor
  • accumulation(curve,from,to) or accumulation(curve,to) gives the accumulation factor
  • zero(curve,time) or zero(curve,time,Frequency) gives the zero-coupon spot rate for the given time.
  • forward(curve,from,to) gives the zero rate between the two given times
  • par(curve,time;frequency=2) gives the coupon-paying par equivalent rate for the given time.

Other models include:

  • BlackScholesMerton derivative valuation
Plotting of Yield Curves

In interactive sessions (e.g. REPL, Notebooks, VS Code, etc.) you can get a pretty printing of yield curves by also using UnicodePlots.jl, for example:

julia> using FinanceModels
julia> q_rate = ZCBYield.([0.01, 0.02, 0.03,0.04,0.03],[1,3,5,10,20]);
julia> fit(Spline.PolynomialSpline(3), q_rate, Fit.Bootstrap())
FinanceModels.Yield.Spline{DataInterpolations.CubicSpline{Vector{Float64}, Vector{Float64}, Vector{Float64}, Vector{Float64}, true, Float64}}([0.009950330853168092, 0.009950330853168092, 0.019802627296179747, 0.02955880224154443, 0.0, 1.0, 2.0, 3.0])

julia> using UnicodePlots 
julia> fit(Spline.PolynomialSpline(3), q_rate, Fit.Bootstrap()) # after importing UnicodePlots
              ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀Yield Curve (FinanceModels.Yield.Spline)⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀           
              ┌────────────────────────────────────────────────────────────┐           
         0.04 │⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⠤⠖⠒⠊⠉⠉⠉⠒⠒⠢⠤⣄⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│ Zero rates
              │⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⠔⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠑⠒⢄⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              │⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⠖⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠑⠢⣄⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              │⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡔⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠉⠒⢄⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              │⠀⠀⠀⠀⠀⠀⠀⠀⢠⠎⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠉⠓⠤⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              │⠀⠀⠀⠀⠀⠀⠀⢠⠎⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠑⠦⣄⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              │⠀⠀⠀⠀⠀⠀⢠⠇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠉⠓⠦⣄⡀⠀⠀⠀⠀⠀⠀⠀⠀│           
   Continuous │⠀⠀⠀⠀⠀⢠⠇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠉⠒⠒⠦⠤⠤⠤⠤│           
              │⠀⠀⠀⠀⢀⠎⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              │⠀⠀⠀⢀⡎⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              │⠀⠀⢀⠎⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              │⠒⠒⠃⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              │⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              │⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
            0 │⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀│           
              └────────────────────────────────────────────────────────────┘           
              ⠀0⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀time⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀30⠀           

Note

This was built-in prior to v4.9 of FinanceModels. It has been split out to materially speed up using FinanceModels.

Projections

Most basically, we can project a contract into a series of Cashflows:

julia> b = Bond.Fixed(0.04,Periodic(2),3)
FinanceModels.Bond.Fixed{Periodic, Float64, Int64}(0.04, Periodic(2), 3)

julia> collect(b)
6-element Vector{Cashflow{Float64, Float64}}:
 Cashflow{Float64, Float64}(0.02, 0.5)
 Cashflow{Float64, Float64}(0.02, 1.0)
 Cashflow{Float64, Float64}(0.02, 1.5)
 Cashflow{Float64, Float64}(0.02, 2.0)
 Cashflow{Float64, Float64}(0.02, 2.5)
 Cashflow{Float64, Float64}(1.02, 3.0)

However, Projections allow one to combine three elements which can be extended to define any desired output (such as amortization schedules, financial statement projections, or account value rollforwards). The three elements are:

  • the underlying contract of interest
  • the model which includes assumptions of how the contract will behave
  • a ProjectionKind which indicates the kind of output desired (cashflow stream, amortization schedule, etc...)

Examples

A fixed bond that needs no valuation model (NullModel()) to define its projected gross cashflows:

Projection(Bond.Fixed(0.04,Periodic(2),3),NullModel(),CashflowProjection())

Plotting Projections

A CashflowProjection or a vector of Cashflows can be plotted with the Makie family of plotting packages. For example:

using FinanceModels, CairoMakie
proj = Projection(Bond.Fixed(0.10,Periodic(2),20),NullModel(),CashflowProjection())
# a stem plot:
stem(proj)

Will produce:

A stem plot of bond cashflows

Fitting Models

       Model                                                               Method
          |                                                                   |
  	|------------|                                                     |---------------|
fit(Spline.Cubic(), CMTYield.([0.04,0.05,0.055,0.06,0055],[1,2,3,4,5]), Fit.Bootstrap())
                    |-------------------------------------------------|
                                              |
                                              Quotes
  • Model could be Spline.Linear(), Yield.NelsonSiegelSvensson(), Equity.BlackScholesMerton(...), etc.
  • Quote could be CMTYields, ParYields, Option.Eurocall, etc.
  • Method could be Fit.Loss(x->x^2), Fit.Loss(x->abs(x)), Fit.Bootstrap(), etc.

This unified way to fit models offers a much simpler way to extend functionality to new models or contract types.

Using Models

After being fit, models can be used to value contracts:

present_value(model,cashflows)

Additionally, ActuaryUtilities.jl offers a number of other methods that can be used, such as duration, convexity, price which can be used for analysis with the fitted models.

Rates

Rates are types that wrap scalar values to provide information about how to determine discount and accumulation factors.

There are two Frequency types:

  • Periodic(m) for rates that compound m times per period (e.g. m times per year if working with annual rates).
  • Continuous() for continuously compounding rates.

Examples

Continuous(0.05)       # 5% continuously compounded
Periodic(0.05,2)       # 5% compounded twice per period

These are both subtypes of the parent Rate type and are instantiated as:

Rate(0.05,Continuous())       # 5% continuously compounded
Rate(0.05,Periodic(2))        # 5% compounded twice per period

Rates can also be constructed by specifying the Frequency and then passing a scalar rate:

Periodic(1)(0.05)
Continuous()(0.05)

Conversion

Convert rates between different types with convert. E.g.:

r = Rate(FinanceModels.Periodic(12),0.01)             # rate that compounds 12 times per rate period (ie monthly)

convert(FinanceModels.Periodic(1),r)                  # convert monthly rate to annual effective
convert(FinanceModels.Continuous(),r)          # convert monthly rate to continuous

Arithmetic

Adding, substracting, multiplying, dividing, and comparing rates is supported.

Guide and Documentation

A guide which explains more about the components of the package and from-scratch examples of extending the package is available in the documenation

Exported vs Un-exported Functions

Generally, CamelCase methods which construct a datatype are exported as they are unlikely to conflict with other parts of code that may be written, but other components must either be qualified by the inner module (e.g. Bond.Fixed) or the package module, e.g. FinanceModels.cashflow_timepoints to use un-exported names.

Consider using import FinanceModels which would require qualifying all methods, but alleviates any namespace conflicts and has the benefit of being explicit about the calls (internally we prefer this in the package design to keep dependencies and their usage clear).

Related Packages

  • InterestRates.jl specializes in fast rate calculations aimed at valuing fixed income contracts, with business-day-level accuracy.
    • Comparative comments: FinanceModels.jl does not try to provide as precise controls over the timing, structure, and interpolation of the curve. Instead, FinanceModels.jl provides a minimal, but flexible and intuitive interface for common modeling needs.

About

Composable contracts, models, and functions that allow for modeling of both simple and complex financial instruments

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages