Skip to content

Latest commit

 

History

History
988 lines (757 loc) · 55.6 KB

CHANGELOG.md

File metadata and controls

988 lines (757 loc) · 55.6 KB
Raw

Changelog

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

Unreleased

Added

  • Support for EFM32 Happy Gecko MCUs (#1747)
  • Added RA4M1 series target, R7FA4M1AB. (#1706)
  • Added --no-location option to the CLI run command, which suppresses the filename and line number information from the rtt log (#1704)
  • target-gen: Add new --test-address option to the target-gen test subcommand. (#1708)
  • cli: Add --verify flag to download, flash and run (#1727)
  • cli: Add read and write commands to interact with target memory (8,32,64 bit words) (#1746)
  • Added STM32U5A and STM32U59 targets. (#1744)

Changed

  • cli: Allow to interrupt probe-rs run during RTT scan (#1705).
  • cli: Ignore errors from enable_vector_catch (#1714).
  • cli: Retry RTT attach before continuing (#1722).
  • cli: Clean clap attributes (#1730)
  • target-gen: (#1745)
    • Memory regions in target.yaml are now sorted with lowest address first.
    • Use .pdsc flash algorithm RAMstart field to calculate load_address for target yaml.
  • Target definitions can now constrain the RTT automatic scanning ranges to just a subset of all available RAM, to support targets that have large amounts of RAM that would take a long time to scan. (#1738, #1749)
  • cli: Output defmt logs as colored (#xxxx)

0.20.0

Released 2023-07-19

Added

  • dap-server: In addition to Elf format, this adds support for binary formats Bin, Hex, and Idf (#1656).
  • Added PAC55XX series targets (#1655)
  • Added support for JTAG commands via CMSIS-DAP protocol (#1462)
  • core: Added PAC55XX series targets (#1655)
  • core: Stack unwinding can now unwind beyond (optionally nested) exception handlers (#1665).
    • ARMv6-M: Report Exception / Fault description, and Unwind the registers and next frames.
    • ARMv7-M: Also decodes details about HardFault, UsageFault, BusFault, and MemManageFault.
    • ARMv7-A, Armv8-M, Armv8-A, RISC-V: Not implemented - requires architecture specific implementations.
  • cli: Added a simple profiler to the probe-rs cli toolkit (#1628)
  • core: Added MSP432E4 target (MSP432E401Y and MSP432E411Y). (#1139)
  • core: Added vector catch for ARMv6-M and ARMv7-M (#1592)
    • Currently supported are HardFault and CoreReset.
  • cli: The run command now prints a stack trace on HardFault (#1592)
  • Added a simple profiler to the probe-rs cli toolkit (#1628)
  • Added MSP432E4 target (MSP432E401Y and MSP432E411Y). (#1139)
  • probe-rs-cli: added attach subcommand. (#1672, #1616)

Changed

  • cli: more descriptive error messages for ambigous chips (#1671).
  • cli: When using memory as the trace sink for an ITM trace, the trace is now read out through the debug registers (#1688)
  • target-gen: RTT is enabled by default now in the test command (#1690).

Fixed

  • core: Added a missing reset catch clear that prevented the CPU from properly starting after flashing RTT from attaching (#1675).
  • cli: fixed --base-address having no effect (#1664).
  • cli: fixed --skip not accepting hexadecimal values (#1664).
  • cli: all the commands now load the chip description path and provide uniform config arguments (#1691).
  • dap-server: The VSCode extension reports all STDERR errors if process initialization fails (#1699).
  • debug : Consider RegisterValue byte size when doing arithmetic on register addresses. (#1701)
  • FTDI probe: Fixed dr_pre bits not being handled correctly during register operations.
  • ARMv7-A, ARMv8-A: Fixed incorrect addresses for registers.

Removed

  • cli: removed obsolete --skip-bytes (which had no effect), use --skip instead (#1664).

0.19.0

Released 2023-06-27

Changed

  • Merged probe-rs-cli, probe-rs-debugger, cargo-embed, cargo-flash binaries into the probe-rs crate.
    • probe-rs-cli is now available in probe-rs.
    • probe-rs-debugger is now available as probe-rs dap-server.
    • cargo-embed and cargo-flash functionality is unchanged, but they are now small shim binaries that invoke probe-rs.
    • Running cargo install probe-rs installs the probe-rs, cargo-embed and cargo-flash binaries.
  • Merged the gdb-server crate into probe-rs. It's now available under probe_rs::gdb_server, and requires enabling the gdb-server Cargo feature.

Fixed

  • probe-rs: recognize CMSIS-DAP probes with device strings containing CMSIS_DAP
  • probe-rs-debugger: Show errors that happen before VSCode/DAP Client session initializion has completed (#1581).
  • probe-rs-cli-util: replace unwanted instance of println with eprintln (#1595, fixes #1593).
  • stlink: exit JTAG mode on idle to tristate debug interface (#1615).
  • probe-rs-debugger: The MS DAP Request setBreapoints clears existing breakpoints for the specified Source, and not for all Source's (#1630)
  • probe-rs/flashing: Inconsistent address formatting in the "No flash memory contains the entire requested memory range" (FlashError::NoSuitableNvm) error message (#1644)
  • probe-rs/flashing: For targets whose flash algorithms require a fixed load address, always select a RAM region containing that address. (#1646)
  • probe-rs: Add support for the esp-idf binary format (#1629)

Added

  • Added support for the Olimex ARM-USB-TINY-H JTAG device (#1586).
  • Added support for propagating CoreStatus to the probe in use (#1588).
  • Added PY32F0xx series targets (#1619).
  • Flashing process can now detect and report if the flashing algorithm locks up the core that it's running on. (#1645)

Removed

  • Removed Sentry integration in the CLI tools.

0.18.0

Released 2023-03-31

Fixed

  • Add reset catch sequence for Silicon Labs EFM32/EFR32 Series 2 chips.

  • Support for detecting WCH-Link as CMSIS-DAP v1 probe

  • target-gen: Use the correct flash base address when testing flash algorithm (#1542)

  • VSCode and probe-rs-debugger is very slow if rttEnabled: true and target application has no RTT initialized (#1497).

  • prober-rs-debugger: Using the readMemory request on RISC-V (ESP32C3 board) is slow (#1275).

  • probe-rs-debugger: Improve handling of disconnect and terminate requests. With support in DAP Client/VSCode for: (#1197)

    • Disconnect - will disconnect the debug session, without affecting the run status of the target application.
    • Disconnect and Suspend - will halt the target application, before disconnecting the debug session.
    • Terminate request is not supported, and DAP configuration is such that it won't be requested by the client.

  • probe-rs-debugger: Improve handling of restart request. With support in DAP Client/VSCode for: (#1507)

    • Restart will now restart the debug session. Currently this is support for ARM targets only.
    • If a newer binary is available, and flashing enabled, then the new binary will be flashed before starting the new debug session.

  • probe-rs-debugger: Ensure VSCode will halt on all configured breakpoints`, irrespective of flashing config. (#1529)

  • probe-rs-debugger: Fix issue where "Watch" variables were not found in the debug session. (#1552)

Changed

  • Update MS DAP protocol to v1.60.0. Documentation clarifications only. (#1458)

  • probe-rs-debugger: Cleaned up the timing of caching unwind information, based on new MS DAP protocol docs. (#1458)

  • probe-rs: Allows add_target_from_yaml function to accept multiple sources

  • probe-rs-debugger: Remove restart-after-flashing option, and make it the default behaviour. (#1550)

  • probe-rs: Trigger rebuild if changes in the PROBE_RS_TARGETS_DIR detected (#1562).

  • probe-rs: Set the flash range of RP2040 to the max supported size (#1567)

  • probe-rs-debugger: Slightly relax the RISC-V restriction when handling restart request. Allows restart, but does not re-flash. (#1569)

Added

  • Added EFM32TG11B family targets (#1420)

  • Added LPC55Sxx target (#1513)

  • Added STM32H5xx targets (#1575)

  • Added custom sequence support to STM32L0, L1, L4, G0, G4, F0, F3, WB, WL, enabling debug clocks during sleep modes (#1521)

  • Add default sequence 'debug_core_stop', which disables debugging when disconneting from ARM cores by default. (#1525)

  • probe-rs-debugger: Initial support for 'gdb-like' commands to be typed into VSCode Debug Console REPL. (#1552)

    • The help command will list available commands, and arguments.
    • Command completions are supported for the individual commands, but not for the arguments.
    • Additional commands can be added in the future, as required, but will benefit from some refactoring to share code with functionality that is already implementated in dap_adapter.rs for MS DAP requests.

  • debug: Enable debug experimental support for binaries compiled from C files (GNU C99/11/17). (#1558)

  • Added support for monitor reset and monitor reset halt commands in gdb-server (#1565)

0.17.0

Released 2023-02-06

Added

  • st-link: Support reading banked DP registers if firmware is new enough to support it.

  • target-gen: Add support for STAR-MC1 by Arm China

Fixed

  • probe-rs: Emit chip erase started and finished/failed events correctly (#1470, #1496)

    The finished/failed event would only be emitted when a sectorwise erase would be performed. Now the events are correctly emitted.

  • probe-rs: Fixed a race condition when reseting NXP chips under JTAG (#1482)

    As an example, this makes flashing the Teensy 4.1 (which has an i.MX RT1062) reliable.

  • probe-rs: jlink: fix WAIT retries on AP reads. Fixes flashing on nrf91. (#1489)

  • Add flashing and debugging support for the ESP32C6 (#1476)

  • Debug: Fixed a number of known issues, which included some code refactoring to avoid code duplication (#1484).

    • Unwind of variables that are in inlined subroutines now resolve correctly under all known conditions.
    • Unwind of nested arrays now resolve, irrespective of the levels of nesting (#1404).
    • Gracefully handle the unwind of arrays that are empty.
    • Correctly unwind pointers/references that are nested as references in several layers of structs.
    • Correctly unwind pointers/references to variants and enums.
    • Fix an error that terminated the debug when new architecture error variants were introduced by a previous PR.
    • Fix an error where unwind memory locations decoded memory values as integer addresses without accounting for endianness.

  • VSCode: Avoid sending extraneous StoppedEvent from probe-rs-debugger (#1485).

  • cmsis-dap: Avoid endless recursion when recovering from errors.

    When an error occurred, the cmsis-dap code tried to read the debug port CTRL register. If that read failed, it would again try to read the same register, returning in an endless recursion.

0.16.0

Released 2023-01-29

probe-rs library is unchanged, version number is increased to keep in sync with other probe-rs packages.

0.15.0

Released 2023-01-28

Added

  • target-gen: Add new --fixed-load-address flag to the target-gen elf subcommand. (#1419)

    This can be used when the flash algorithm needs to be loaded at a specific address. The address is determined automatically from the ELF file.

  • target-gen: Extract RTT control block address from flash algorithm. (#1427)

    Check if the flash algorithm supports RTT, and if it does, store the RTT control block address in the target YAML file.

  • probe-rs: Read RTT during flashing procedures if the algorithm supports RTT.

    This enables better debugging for flash-algorithms and should encourage development of said algorithms.

  • Add support for FT4232HL probe.

  • probe-rs-cli: Add --log-file option to specify where the log file should be placed.

  • target-gen: Add a command which enables the easy development and debugging of a flash algorithm.

    target-gen test is a new command to automatically upload, run, print RTT messages and test a flash algorithm. Have a look at the - Added a simple profiler to the probe-rs cli toolkit (#1628)template to create a new flash algorithm.

Changed

  • cmsisdap: Increased read timeout from 100ms to 1000ms.

  • rtt: Moved RTT to the probe-rs library instead of having it in its own library. (#1411)

  • probe-rs: update probe-rs/targets/STM32F3_Series.yaml with target-gen

Fixed

  • probe-rs: Avoid nested calls to tracing macros, otherwise filtering doesn't work properly. (#1415)

  • probe-rs-cli: Reduce RTT polling frequency in run command to avoid USB instability issues.

0.14.2

Released 2023-01-18

  • Added STM32С0 target (STM32С011 and STM32С031). (#1403)

Fixed

  • stlink: fix retries on DP/AP WAIT errors. (#1406)

0.14.1

Released 2023-01-14

0.14.0

Released 2023-01-13

Added

  • Added PartialEq Trait to the struct DebugProbeInfo. (#1173)
  • Added support for configuring trace data destinations (#1177)
    • Tracing on M4 architectures utilize the TPIU for all hardware tracing (#1182)
  • ITM tracing can now be completed using the probe-rs CLI (#1180)
  • Added support for MIMXRT10xx targets (#1174)
  • Added support for the Cortex M7 of MIMXRT11xx targets (#1250)
  • Added support for in-line (column specific) breakpoints where multiple statements (potential breakpoints) are on the same line of source code. (#1156)
  • Added support for MSP432P4XX targets (#1201)
  • Added support for Microchip SAMDA1
  • Added Probe re-attach handling when needed after debug_device_unlock
  • Added Custom ArmDebugSequence for ATSAM D5x/E5x devices
  • Added a FlashLoader::data method (#1254)
  • Added Support for STM32H735 family. (#913)
  • Added support for MAX32660 target (#1249)
  • Added support for W7500 target
  • Added an optional stack_size configuration to flash algorithms to control the stack size (#1260)
  • Added Support for Debug Erase Sequences that (if available) are used instead of the normal chip-erase logic
  • Added Support for GD32E50x targets (#1304)
  • Added support for the Infineon XMC4000 family
  • Added support for the Infineon XMC4000 family (#1301)
  • Added debug support for viewing function arguments (#1333)
  • Added support for the EFM32GG11B family (#1346)
  • Added support for finding targets externally (#1338)

Changed

  • SWV vendor configuration has been refactored into sequences and trace functions have been renamed:
    • Session::setup_swv has been renamed to Session::setup_tracing
    • Session::read_swo has been renamed to Session::read_trace_data
  • probe-rs-debugger: RISC-V ebreak instruction will enter Debug Mode (#1213)
  • RTT: When a channel format is defmt, automatically set the channel mode to BlockingIfFull on attach. (Enhancement request #1161)
  • RTT: Report data decode errors when channel format is defmt. (#1243)
    • Note: This is a breaking API change for probe_rs_cli::rtt::RttActiveChannel::get_rtt_data(). To mitigate the impact of this change:
      • probe_rs_cli::rtt::RttActiveTarget::poll_rtt() will maintain the original signature and behaviour of ignoring errors from defmt until deprecated in 0.14.0.
      • The new probe_rs_cli::rtt::RttActiveTarget::poll_rtt_fallible() will propagate errors from get_rtt_data() on any of the active channels.
  • target-gen: Various changes and optimizations: (#1259)
    • Memory addresses and sizes in YAML are generated in hex format, for improved readability.
    • Remove Option::is_none, empty Vec, and false bool values, in generated YAML, for improved readability.
    • Generate all pack file specified memory regions.
    • Match memory regions to pack file specified core names.
  • probe_rs_target::chip::Chip has a new field pack_file_release which is populated by target-gen.(#1259)
  • Benchmarking code moved from an example to probe-rs-cli subcommand (#1296).
  • Replace log crate, with tracing in probe-rs-debugger executable, and in the rtt library. (#1297)
  • Improved formatting of probe-rs-cli info output. (#1305)
  • Refactor VSCode handling of logging and user messaging - see VSCode PR #37 (#1334)
  • Refactor error handling, split crate::Error::ArchitectureSpecific into two separate variants for RISC-V and ARM, and create a new ArmError enum for ARM specific errors. (#1344)

Fixed

  • (#1351) Warning messages about duplicate packages when using probe-rs as a library
  • (#1269) Error message in case of FTDI device access issues.
  • (#350) Flashing and debugging on STM32 chips using WFI instructions should now be stable (fixed in #1177)
  • Fixed rtthost --scan-region to properly support memory range scannig. (#1192)
  • Debug: Improve logic for halt locations used by breakpoints and stepping. (#1156)
  • Debug: Some in-scope variables are excluded from stack_trace. (#1156)
  • Debug: Ensure RTT buffer on target is reported to DAP client in 'timely' manner. (#1208)
  • Debug: Provide unique default names on DAP client, when multiple RTT Channels have no configured name. (#1208)
  • Added missing memory regions for ESP32.yaml file, to fix RTT Channel name issue. (#1209)
  • Fix maximum addressable Flash size in ESP32.yaml file, to be 16Mb (was 64Mb). (#1209)
  • Debug: Enable stepping or running past a BKPT (Arm Cortex-M) or EBREAK (RISC-V) instruction (#1211).
  • (#1058) Non-successful DAP Transfer requests no longer require response data to be present.
  • Debug: Gracefully handle stack unwind when CFA rule references a FP with value of zero. (#1226)
  • Debugger: Improve core status checking during launch.(#1228)
  • Debugger: Prevent stack overflows when expanding "static" section in probe-rs-debugger. (#1231)
  • RTT: Prevent panicking in probe-rs-cli-util/src/rtt/rs when defmt stream decoding provides invalid frame index. (#1236)
  • Fix: Attaching to LPC55S69 seems to stop code execution - incorrect values in target YAML. (#1220)
  • Debug: Fix probe-rs-debugger crashes when variable unwind fails with excessively long error messages. (#1252)
  • Fix: Dual core devices had incorrect 'core' names in STM32H7_Series.yaml, causing panic during flashing. (#1023)
  • Fix: Include all RAM regions in STM32H7_Series.yaml (#429)
  • Fix: Include all new STM32H7 variants from the latest CMSIS pack file (#913)
  • Fix: Update STM32G0_Series.yaml to include latest variants (STM32G050, STM32G051, STM32G061, STM32G0B0, STM32G0B1, STM32G0C1) (#1266)
  • Fix: Correct flash algorithm values in LPC55S69.yaml. (#1220)
  • Fix: Timeout during flashing when using connect under reset - regression from #1259. (#1286)
  • Fix: Validate RiscV CSR addresses to avoid unnecessary panics. (#1291)
  • Debugger: Fix unpredictable behaviour when breaking on, or stepping over macros. (#1230)
  • Fix: Extend fix for WFI instructions (#1177) to STM32F1
  • Debugger: RTT data from target is now polled/reported in a timely manner, during stepping, and after breakpoint halting. (#1341)

0.13.0

Added

  • Added an option to disable use of double-buffering when downloading flash (#1030, #883)
  • rtt::ChannelMode implements additional traits: Clone, Copy, serde's Serialize and Deserialize
  • Added a permissions system that allows the user to specify if a full chip erase is allowed (#918)
  • Added debug sequence for the nRF5340 that turns on the network core can unlock both cores by erasing them if that is permitted (#918)
  • Support for core registers msp, psp and extra, extra containing:
    • Bits[31:24] CONTROL.
    • Bits[23:16] FAULTMASK.
    • Bits[15:8] BASEPRI.
    • Bits[7:0] PRIMASK.
  • Debug port start sequence for LPC55S16. (#944)
  • Added a command to print the list of all supported chips. (#946)
  • Added a command to print info about a chip, such as RAM and the number of cores. (#946)
  • ARM:Session::swo_reader that returns a wrapping implementation of std::io::Read around Session::read_swo. (#916)
  • Added CortexM23 to Armv8m mapping for target-gen. (#966)
  • Added get_target_voltage to the Probe struct to access the inner DebugProbe method. (#991)
  • Debugger: Added support for showing multiple inlined functions in backtrace. (#1002)
  • Debugger: Add support LocLists (attribute value of DW_AT_location) (#1025)
  • Debugger: Add support for DAP Requests (ReadMemory, WriteMemory, Evaluate & SetVariable) (#1035)
  • Debugger: Add support for DAP Requests (Disassemble & SetInstructionBreakpoints) (#1049)
  • Debugger: Add support for stepping at 'statement' level, plus 'step in', 'step out' (#1056)
  • Debugger: Add support for navigating and monitoring SVD Peripheral Registers. (#1072)
  • Added GD32F3x0 series support (#1079)
  • Added support for connecting to ARM devices via JTAG to the JLink probe
  • Added preliminary support for ARM v7-A cores
  • Added preliminary support for ARM v8-A cores
  • CLI Debugger: Added 8-bit read / write memory commands
  • Added Arm Serial-Wire-View (SWV) support for more targets (e.g. STM32H7 families) (#1117)
    • Support added for trace funnels and SWO peripherals
    • Added custom sequencing for STM32H7 parts to configure debug system components on attach
  • Added support for ARMv8-A cores running in 64-bit mode (#1120)
  • Added FPU register reading support for cortex-m cores
  • Added support for Huada Semiconductor HC32F005 MCUs.
  • Added FPU register support for Cortex-A cores (#1154)
  • GDB now reports the core name in info threads (#1158)
  • Added a recover sequence for the nRF9160 (#1169)
  • Added support for JTAGAccess::write_register_batch the esp-serial-jtag probe (#1633)

Changed

  • ARM reset sequence now retries failed reads of DHCSR, fixes >500kHz SWD for ATSAMD21.
  • Chip names are now matched treating an 'x' as a wildcard. (#964)
  • GDB server is now available as a subcommand in the probe-rs-cli, not as a separate binary in the gdb-server package anymore. (#972)
  • probe_rs::debug and probe-rs-debugger changes/cleanup to the internals (#1013)
    • Removed StackFrameIterator and incorporated its logic into DebugInfo::unwind()
    • StackFrame now has VariableCache entries for locals, statics and registers
    • Modify DebugSession and CoreData to handle multiple cores.
    • Modify Variable::parent_key to be Option and use None rather than 0 values to control logic.
    • Use the updated StackFrame, and new VariableNodeType to facilitate 'lazy' loading of variables during stack trace operations. VSCode and MS DAP will request one 'level' of variables at a time, and there is no need to resolve and cache variable data unless the user is going to view/use it.
    • Improved Variable value formatting for complex variable types.
  • Updated STM32H7 series yaml to support newly released chips. (#1011)
  • Debugger: Removed the CLI mode, in favour of probe-rs-cli which has richer functionality. (#1041)
  • Renamed Probe::speed to Probe::speed_khz.
  • Debugger: Changes to DAP Client launch.json to prepare for WIP multi-core support. (#1072)
  • ram_download example now uses clap syntax.
  • Refactored probe-rs/src/debug/mod.rs into several smaller files. (#1082)
  • Update STM32L4 series yaml from Keil.STM32L4xx_DFP.2.5.0. (#1086)
  • Debugger: SVD uses new expand feature of svd-parser crate to expand arrays and clusters. (#1090)
  • Updated cmsis-pack dependency to version 0.6.0. (#1089)
  • Updated all parameters and fields that refer to memory addresses from u32 to u64 in preparation for 64-bit target support. (#1115)
  • Updated Core::read_core_reg and Core::write_core_reg to work with both 32 and 64-bit values (#1119)
  • Renamed core::CoreRegisterAddress to core::RegisterId, and core::CoreRegister to core::MemoryMappedRegister. (#1121)
  • Updated gdb-server to use gdbstub internally (#1125)
  • gdb-server now uses all cores on a target (#1125)
  • gdb-server now supports floating point registers (#1133)
  • Debug: Correctly handle compressed vs non-compressed instructions sets for RISC-V. (#1224)
  • The core now needs to be halted for core register access. (#1044)
  • The memory functions to do memory transfers have been standardized. This effectively means that read_* and write_* do what the name says unconditionally. E.g. read_8 will always do 8 bit reads or write_32 will always do 32 bit writes. New functions that are called read and write have been introduced. Those will try to maximize throughput. They mix transfer sizes however they see fit. If you need to use a feature of a chip that requires a specific transfer size, please resort to the read_* and write_* functions. (#1078)

Fixed

  • Fixed a panic when cmsisdap probes return more transfers than requested (#922, #923)
  • probe-rs-debugger Various fixes in PR. (#895)
    • Fix stack overflow when unwinding circular references in data structures. (#894)
    • Reworked the stack unwind in StackFrameIterator::new() and StackFrameIterator::next()
      • More reliable backtrace and register values for previous frames in the stack.
      • Lazy (on demand) load of <statics> variables to avoid overhead during debugging.
      • More accurate breakpoint handling from VSCode extension.
      • Virtual frames for inlined functions, that can step back to the call site.
    • A fix to adapt to Rust 2021 encoding of Dwarf DW_AT_discr_value tags for variants.
    • Updated MS DAP Protocol to 1.51.1.
    • Adapt to defmt 0.3 'Rzcobs' encoding to fix VSCode #26.
    • Support the new defmt 0.3 DEFMT_LOG environment variable.
    • Requires probe-rs/vscode PR #27
    • Debugger: Improved RTT reliability between debug adapter and VSCode (#1035)
    • Fixed missing derive feature for examples using clap.
    • Increase SWD wait timeout (#994)
    • Debugger: Fix Source breakpoints only worked for a single source file. (#1098)
    • Debugger: Fix assumptions for ARM cores
    • GDB: Fix assumptions for ARM cores
  • Fixed access to Arm CoreSight components being completed through the wrong AP (#1114)
  • Debug: Additions to complete RISC-V and 64-bit support. (#1129)
    • probe_rs::debug::Registers uses new core::RegisterId and core::RegisterValue for consistent register handling.
    • RISC-V Disassembly works correctly for 'compressed' (RV32C isa variants) instruction sets.
    • RISC-V stack unwind improvements (stack frames and registers work, variables do not resolve correctly.)
  • Fixed a possible endless recursion in the J-Link code, when no chip is connected. (#1123)
  • Fixed an issue with ARMv7-a/v8-a where some register values might be corrupted. (#1131)
  • Fixed an issue where probe-rs-cli's debug console didn't detect if the core is halted (#1131)
  • Fix GDB interface to require a Mutex to enable multi-threaded usage (#1144)
  • Debug: RISC-V improvements (#1147).
    • Fix: Variable values now resolve correctly. This fix also fixes variables when using the rustc flag -Cforce-frame-pointers=off on ARM.
    • Fix: Allow unwinding past frames with no debug information (See Issue #896)
    • Fix: Using restart request from VSCode now works for both states of halt_after_rest.
    • Partial Fix: Set breakpoints and step on RISC-V. Breakpoints work but stepping only works for some breakpoints. This will be addressed in a future PR.
  • Fix nrf9160 target file so it can erase UICR section (#1151)
  • Fix connect under reset for CMSIS-DAP probes(#1159)
  • Fix double default algorithms for the stm32f7x line with 1MB flash (#1171)
  • Fixed detecting CMSIS-DAP probes that only say "CMSIS-DAP" in interface strings, not the product string (#1142/#1135/#995)

0.12.0

  • Added support for chip-erase flag under the probe-rs-cli download command. (#898)
  • Added support for disable-progressbars flag under the probe-rs-cli download command. (#898)
  • Fixed bug in FlashLoader not emitting ProgressEvent::FinishedErasing when using do_chip_erase. (#898)

Added

  • Added initial multicore support. (#565)
  • probe-rs-cli-util: added common option structures and logic pertaining to probes and target attachment from cargo-flash. (#723)
  • probe-rs-cli-util: escape hatch via -- for extra cargo options not declared by common_options::CargoOptions.
  • Added SWDv2 multidrop support for multi-DP chips. (#720)
  • Added The possibility to use --connect-under-reset for the probe-rs-cli info command. (#775)
  • Added support for flashing bin format binaries with the probe-rs-cli download command. (#774)
  • Improved number parsing on all the probe-rs-cli commands. They now all accept normal (01234), hex (0x1234), octal (0o1234) and binary (0b1) formats. (#774)
  • Added progress bars to the probe-rs-cli download command. (#776)
  • Improve reliability of communication with the RISC-V debug module by recovering from busy errors in batch operations. (#802)
  • Added optional ability to load fixed address flashing algorithms (non PIC). (#822)
  • Added target definition validation to make handling inside probe-rs easier by making some basic assumptions about the validity of the used ChipFamily without always checking again. (#848)
  • Added support for the built in JTAG on the ESP32C3 and other ESP32 devices (#863).
  • Added name field to memory regions. (#864)
  • debugger: Show progress notification while device is being flashed. (#871, #884)
  • Add optional ability to load fixed address flashing algorithms (non PIC). (#822)
  • Added probe-rs-cli run command, to flash and run a binary showing RTT output.
  • Added a new USB VID for ST-Link V3 without Mass Storage. (#1070)

Removed

  • probe-rs-cli-util: unused module argument_handling. (#760)

Changed

  • Enabled the generation of global timestamps and exception traces for ARM targets on Session::setup_swv.
  • Changed to hidraw for HID access on Linux. This should allow access to HID-based probes without udev rules (#737).
  • Support batching of FTDI commands and use it for RISC-V (#717)
  • Include the chip string for NoRamDefined in its error message
  • Improved handling of errors in CMSIS-DAP commands (#745).
  • Implemented RTT (String, BinaryLE, and Defmt) in probe-rs-debugger (#688).
  • probe-rs-debugger will use the VSCode Client launch.json configuration to set RUST_LOG levels and send output to the VSCode Debug Console (#688).
  • Bumped dependencies bitvec 0.19.4to bitvec 0.22, nom 6.0.0 to nom 7.0.0-alpha1. (#756)
  • DebugProbeError::CommandNotSupportedByProbe now holds a name string of the unsupported command.
  • Target YAMLs: Renamed core.type values from M0, M4, etc to armv6m, armv7m, armv8m.
  • Breaking API: Modify probe-rs-rtt interfaces to use probe_rs::Core rather than Arc<Mutex<probe_rs::Session>>.
  • An opaque object is returned to represent a compiled artifact. This allows extra information to be provided in future without a breaking change (#795).
  • Information on whether a rebuild was necessary is included in the artefact (nothing changed if fresh == true) (#795).
  • Debug was reimplemented on Session (#795).
  • Target YAMLs: Changed flash_algorithms from a map to an array. (#813)
  • Reject ambiguous chip selection.
  • Prefer using read over read_8 for better performance and compatibility. (#829)
  • Increased default RTT Timeout (retry waiting for RTT Control Block initialization) to 1000ms in probe-rs-debugger. (#847)
  • Improved when RTT is initialized/retried, and removed rtt_timeout from recognized options of probe-rs-debugger. (#850)
  • Refactor probe-rs-debugger code as per launch vs. attach changes documented in VS Code extension PR # 12 (#854)
  • Breaking change: probe-rs-debugger and the associated VSCode extension PR #21 now uses camelCase for all launch.json properties (#885)
  • Publicly export core::RegisterFile type.
  • The trait surface for DAP/AP/DP access was cleaned up and more clarity around the access level of the API was added by properly putting Raw or not in the name.
  • target-gen now deduplicates flash algorithms when generating target files. (#1010)

Fixed

  • Detect proper USB HID interface to use for CMSIS-DAP v1 probes. Without this, CMSIS-DAP probes with multiple HID interfaces, e.g. MCUlink, were not working properly on MacOS (#722).
  • When reading from a HID device, check number of bytes returned to detect USB HID timeouts.
  • Fix connecting to EDBG and similar probes on MacOS (#681, #721)
  • Fixed incorrect flash range in fe310 causing flashing to fail (#732).
  • Multiple default algorithims would silently select the first, now errors intead (#744).
  • Fixed STM32WL targets getting a HardFault when flashing binaries larger than 64K (#762).
  • Use a more reliable JTAG IR length detection when there's only a single target in the chain. Fixes an issue with the esp32c3. (#796, #823).
  • Replaced unreachable! induced panic with logic to fix probe-rs-debugger failures. (#847)
  • Fixed logic errors and timing of RTT initialization in probe-rs-debugger. (#847)
  • Debugger: Do not crash the CLI when pressing enter without a command. (#875)
  • Fixed panic in CLI debugger when using a command without arguments. (#873)
  • Debugger: Reduce panics caused by unwrap() usage. (#886)
  • probe-rs: When unwinding, detect if the program counter does not change anymore and stop. (#893)

Target Support

  • Added LPC5516 targets. (#853)
  • Added LPC552x and LPC55S2x targets. (#742)
  • Added SAM3U targets. (#833)
  • Added RP2040 target (Raspberry Pi Pico). (#720)
  • Added STM32WL55JCIx target. (#835)
  • Add esp32.yaml with esp32c3 variant. (#846)
  • Added STM32U5 series target.
  • Added all RAM regions to most STM32H7 parts. (#864)

0.11.0

Added

  • Support for the HNONSEC bit in memory access. This now allows secure access on chips which support TrustZone (#465).
  • Support for RISC-V chips which use the System Bus Access method for memory access when debugging (#527).
  • Support for double buffering in the flash loader, which increased flashing speed (#107).
  • Determine location of debug components by parsing ROM table (#431).
  • Support for "flashing" data to RAM in the flash loader (#480).
  • Added FTDI C232HM-DDHSL-0 to comaptible USB list for FTDI backend (#485).
  • Added --list-probes and -noption to built-in GDB server binary (#486).
  • Added RISC-V support to GDB server (#493).
  • Added Session::target() to access the target of a session (#497).
  • Support for target description in the GDB server (#498).
  • Support for register write commands in the GDB server (#510).
  • Added get_target_voltage() function to DebugProbe, which can be used to read the target voltage if the probe supports it (#533).
  • Added do_chip_erase flag to DownloadOptions, to allow using chip erase when flashing (#537).
  • RISC-V: Support for memory access using system bus (#527).
  • Added a generic read function, which can be used for memory access with maximum speed, regardless of access width (#633).
  • Added an option to skip erasing the flash before programming (#628).
  • Added a new debugger for VS Code, using the Debug Adapter Protocol. The debugger can be found in the probe-rs-debugger crate (#620).
  • Additional datatype support for the debugger, plus easier to read display values (#631)
  • Added support for raw DAP register reads and writes, using RawDpAccess, RawApAccess trait (#669, #689, #700).
  • Added support for verify after flashing. (#671).
  • Handle inlined functions when getting a stack trace (#678).
  • Added 'Statics' (static variables) to the stackframe scopes. These are now visible in VSCode between 'Locals' and 'Registers'. This includes some additional datatypes and DWARF expression evaluation capabilities. (#683)
  • Added a function to mass erase all memory. (#672).
  • Handle Cortex LOCKUP status during debugging (#707)

Target Support

  • Added EEPROM region flashing support for STM32L071KBTx (#589).
  • Added support for Microchip/Atmel SAM4 (#590).
  • Added support for Microchip SAME5x and SAME70 (#596).
  • Added support for Microchip SAMD10 (#597).
  • Added support for Microchip SAMD11 (#444).
  • Fixed support for STM32WB55 (#466).
  • Updated target description for LPC55S69 to newest version (#481).
  • Use pyocd flash algorithm for NRF52 (#492).
  • Added support for flashing NRF52 UICR (#500).
  • Updated target description for SAMD21 (#542).
  • Support flashes bigger than 128 kBytes on STM32l4xx (#547).
  • Added support for LPC546xx (#560).
  • Added support for SiLabs EFR32 targets (#566, #567).
  • Added support for flashing Intel hex files using probe-rs-cli (#618).
  • Updated target description for NRF91 (#619).
  • Added a RAM benchmark script (#514).
  • Initial support for batched commands for J-Link (#515).
  • Added support for the STM32F2 family (#675).
  • Added support for FE310-G002 (HiFive1 Rev. B).
  • Added flash algorithm for GD32VF1 family (#830).

Changed

  • Renamed MemoryRegion::Flash to MemoryRegion::Nvm (#482).
  • Renamed FlashInfo to NvmInfo
  • Renamed FlashRegion to NvmRegion and its flash_info() method to nvm_info()
  • Renamed FlashError::NoSuitableFlash to FlashError::NoSuitableNvm
  • The into_arm_interface and into_RISC-V_interface functions are replaced by the try_into_arm_interface and try_into_RISC-V_interface functions, which return the Probe struct in the case of an error. This improves the auto detection process (#524).
  • Improved SWD protocol handling for J-Link (#443, #539, #619).
  • Improved error handling for batched CMSIS-DAP commands (#445).
  • Use sticky overrun behaviour for improved J-Link performance (#450).
  • Better error handling for flashing (#451).
  • gdb-server: Halt the chip when attaching (#461).
  • Better error messages in the ram_download example (#464).
  • Cache value of CSW register to reduce number of SWD transfers (#471).
  • Use erased_byte_value from target description as default value in the flash loader (#475).
  • Added retry functionality for CMSIS-DAP probes (#462).
  • RISC-V: Use abstract commands for CSR access for improved speed (#487).
  • The download_file and download_file_with_options functions now accept AsRef<Path> instead of &Pathto be more convenient to use (#545, #579).
  • Use itm-decode to decode ITM packets instead of built-in decoder (#564).
  • Flash API Improvements: Data is now owned by the FlashLoaderand FlashBuilder structs to simply the API, and the FlashLoader::commit() accepts the DownloadOptions struct instead of bool flags (#605).
  • Improve internal tracking of core status (#629).
  • Rework SWD sequence in J-Link (#513).
  • Print ST-Link version in name (#516).
  • Improve argument parsing in debugger, add speed option to probe-rs-cli (#523).
  • probe_rs::flashing::DownloadOptions is now marked non_exhaustive, to make it easier to add additional flags in the future.
  • Replace lazy_static with once_cell::sync::Lazy (#685).
  • Use new SendError instead of anyhow::Error in cmsisdap module (#687).

Fixed

  • Fixed M33 breakpoints (#543).
  • Fixed a bug where ST-Link v3 is not able to read 8 bit data chunks with more than 255 bytes. Currently we set the chunking to 128 bytes. This might be a bug in the ST-Link v3 firmware and might change in the future (#553, #609).
  • Errors occuring while trying to open J-Link probes do not prevent other probes from working anymore (#401).
  • CMSIS-DAPv1 probes with a HID report size different than 64 bytes are now supported (fixes #282).
  • CMSIS-DAPv2 devices are now drained when attaching (fixes #424).
  • Improved SWO speed on CMSIS-DAPv2 (fix #448).
  • Session auto attach does no longer panic when no probes are connected (#442).
  • probe-rs-cli: Halt core before printing backtrace (#447).
  • gdb-server: Ensure registers are only read when core is halted (#455).
  • Fixed loading Hex files using the flash loader (#472).
  • Fixed off-by-one errors when flashing chip with contiguous memory ranges (#574).
  • Ensure only ELF segments with type PT_LOAD are flashed (#582).
  • Fixed overflow in hex file loading, and ensure addresses are calculated correctly (#604).
  • RISC-V: Fixed scanning for harts (#610).
  • RISC-V: Fixed abstract command handling (#611).
  • Fixed a bus congestion issue where the chip is polled too often, leading to problems while flashing (#613).
  • The breakpoint address is now verified to ensure a breakpoint at the given address is actually possible (#626).
  • RISC-V: Use correct address for access to abstractautoregister (#511).
  • The --chip argument now works without specifying the --elf argument (fix #517).
  • Fixed: Invalid "Unable to set hardware breakpoint", by removing breakpoint caching, instead querying core directly (#632)
  • Fix crash on unknown AP class. (#662).
  • Fix too many chip erases in chips with multiple NvmRegions. (#670).
  • Added missing skip_erase setter function introduced in #677 (#679).
  • Fixed incorrect array size calculation (#683)
  • STLink: Removed unnecessary SELECT bank switching (#692)
  • STLink: chunk writes in write_8 to avoid hitting limit (#697)
  • Partial fix for a bug where probe-rs-debugger does not set breakpoints when the target is in sleep mode (#703)

0.10.1

Fixed

  • Replace calls to unwrap() in adi_v5_memory_interface.rs with proper error types (#440).
  • Correct URL for Sentry logging in probe-rs-cli-util (#439).

0.10.0

Added

  • Added support for the dedicated ST-Link API which doubles flash write speeds for ST-Link v2 (#369, #377, #397, #435).
  • Added support for the STM32WLE.
  • Added support for the ATSAMD21 & ATSAMD51.
  • Added support for the STM32L1.
  • Added support for the EFM32PG12.
  • Added support for the MAX32665 & MAX32666.
  • Building probe-rs now works without rustfmt being present too (#423).
  • Added support for implicit ebreak in RISC-V chips (#423, #430).

Changed

  • nRF devices now use the SoftDevice Erase algorithm for flashing which will also erase the flash if it contains the softdevice. The previous algorithm prevented users from flashing at all if a softdevice was present (#365, #366).
  • The names of probe interface methods were named more consistently (#375).
  • FTDI support is now opt in. Please use the ftdi feature for support (#378).

Fixed

  • ST-Links now retry the command if a wait was returned in during the SWD transmission (#370).
  • Fixed a bug where CMSIS-DAP would not be able to open a probe with a specific VID/PID but no SN specified (#387).
  • Fixed a bug where a CMSIS-DAP probe could not be opened if an USB descriptor did not contain any language. This was dominant on macOS (#389).
  • Fixed support for the nRF91 (#403).
  • Fixed a bug on Windows where paths were not canonicalized properly (#416).
  • Fixed a bug where a target fault during AP scans would not be cleared and result in failure on some cores even tho there was no actual issue other than the scan being aborted due to an AP not being present (which is perfectly okay) (#419).
  • Use the correct bit mask for the breakpoint comperator on Cortex-M0(+) devices (#434).
  • Fixed a bug where breakpoints on M0 would always match the full word even if half word would have been correct (#368).

Known issues

  • Flashing on some chips (known are SAMDx and rare STM32s) with the JLink or CMSIS-DAP probes can be slow. If you see an error involving th DRW or CSW registers, please try using a speed of 100kHz and file a report in #433.

0.9.0

Added

  • Added initial support for FTDI based probes.
  • Added support for the STM32L5 family.
  • Added support for the STM32G4 family.
  • Added support for ITM tracing over SWO in general and drivers for all probes.
  • The status LED on CMSIS-DAP probes is now used by probe-rs.

Changed

  • Renamed ProgressEvent::StartFlashing to ProgressEvent::StartProgramming and ProgressEvent::PageFlashed to ProgressEvent::PageProgrammed to make naming of events more consistent.

Fixed

  • Fixed a bug where a J-Link would only be opened if the VID, PID AND Serial No. would match. As the Serial is optional, only VID/PID have to match now.
  • Fixed a bug with the readout of the serial string that could fail for DAP devices and lead to weird behavior.
  • Fixed a bug where the serial number was not printed correctly for some ST-Links.

0.8.0

Added

  • Added support for new devices in the nRF52 family - nRF52805, nRF52820 and nRF52833.
  • Added support for the STM32F7 family.
  • The Session struct and dependants now implement Debug.
  • The J-Link driver now logs a warning if no proper target voltage is measured.
  • The J-Link driver now logs some more information about the connected probe on the INFO and DEBUG levels.

Changed

  • Improved error handling by a great deal. Errors now can be unwound properly and thus displayed nicely in UI tooling.
  • Core::halt() now requires a timeout to be specified. This ensures that procedures such as flashing wont time out when certain tasks (like erasing a sector) take longer.

Fixed

  • Fixed a bug where a probe-selector would not work for the JLink if only VID & PID were specified but no serial number.
  • Fixed a bug where chip descriptions would fail to parse because of a changed behavior in a newer version of serde_yaml.
  • Fixed the LPC55S66 and LPS55S69 targets.
  • CMSIS-DAPv1 read operations now properly time out instead of blocking forever, thus giving the user proper feedback.
  • Even if an ST-Link cannot be opened (for example on Windows due to a missing driver) it will now be listed properly, just without a serial number.
  • Fixed a bug where the J-Link would not be selected properly if no serial number was provided in the selector even if there was a VID:PID pair that matched.

0.7.1

Changed

  • DebugProbeType is now public.
  • Update LPC55S66/LPC55S69 targets.

Fixed

  • Add missing core value for LPC55S66 and LPC55S69.

0.7.0

Added

  • Added support for RISC-V flashloaders! An example how to write one can be found here: https://github.com/Tiwalun/hifive-flashloader.
  • Added support for LLDB (works better than GDB in most cases; try it!).
  • Added support for specifying a probe via VID, PID and serial number.

Changed

  • The probe-rs API was changed that no internal Rc<RefCell<T>>s are present anymore to enable multithreading and make the API cleaner (see probe-rs#240 for the changes).
  • Cleaned up the gernal GDB server code.
  • Make some parts of the API public such that custom APs can be implemented and used for ARM targets (see probe-rs#249, probe-rs#253)
  • Removed a great deal of (non-panicking) unwraps inside the code.
  • Improved erroring by a great deal. Removed error stacking and started using anyhow for upper-level errors. This allows for nicer error printing!

Fixed

  • Fixed a bug where an empty DAP-Link batch would just crash without a proper error message.
  • Fixed a check where the serial number of the stlink which would be supported at a minimum was too low (off by one).
  • Fixed the broken vCont & memory-map commands in the GDB stub.
  • Fixed deserialization of flash algorithm descriptions which enables to load target descriptions during runtime.
  • Fixed an issue where the error message would say that more than one probe was found when no probe was detected at all.
  • Fixed a bug in the gdb-server that causes it to never halt after a continue.
  • Fixed an issue where the gdb-server would always use 100 % cpu time of the core it's running on.

0.6.2

Added

  • WireProtocol now implements Serialize.

Fixed

  • The GDB stub will no longer crash when GDB tries to access invalid memory.

Known issues

  • Some ST M3s such as the STM32F103 are known to have reset issues. See #216.

0.6.1

Added

  • Support for the STM32F3 family was added.
  • Added support for most Holtek ARM chips.
  • Added support for the STM32H7 and M7 cores.

Changed

  • DAPlink implementation now batches read_register and write_register commands, executing the entire batch when either the batch is full or a read_register is requested, returning the read result or an error which may indicate an error with a batched command. As a consequence, write_register calls may return Ok(()) even if they have not been submitted to the probe yet, but any read will immediately execute the batch. Operations such as device flashing see around 350% speedup.
  • Improved error handling for STLinks that have an older firmware which doesn't support multiple APs.
  • The flash layout reporting struct is less verbose now.

Fixed

  • Fix a bug in the CLI where it would always be unable to attach to the probe.

Known issues

  • Some ST M3s such as the STM32F103 are known to have reset issues. See #216.

0.6.0

Added

  • Flashing support for the STM32L4 series.
  • Added the possibility to set the speed on DebugProbes and also implemented it for all three supported probes (CMSIS-DAP, ST-Link and J-Link).
  • Make M3 cores selectable from built in targets.
  • Make the filling of erased flash sectors with old contents possible. When flashing, the minimal erase unit is a sector. If the written contents do not span a sector, we would erase portions of the flash which are not written afterwards. Sometimes that is undesired and one wants to only replace relevant parts of the flash. Now the user can select whether they want to restore unwritten but erased parts to the previous contents. The flash builder now automatically reads to be erased and not written contents beforehand and adds them to the to be written contents.
  • Added a flash visualizer which can generate an SVG of the layouted flash contents.

Changed

  • Improved error handling for the flash download module.
  • Improved error messages for ARM register operations.
  • The flash module has been renamed to flashing.
  • Downloading a file now has the possibility to add options instead of multiple parameters to clean up the interface.
  • read8/write8 implement true 8-bit accesses if they are supported by target.
  • Improved build times by changing code generation for targets. For more details, see PR #191.
  • Improved logging for ELF loading. If there was no loadable sections before, nothing would happen. Now it is properly reported, that there was no loadable sections.

Fixed

  • Fix the usage of ST-Link V3.
  • Removed an unwrap that could actually crash.
  • Fixed a bug where reading a chip definition from a YAML file would always fail because parsing a ChipFamily from YAML was broken.
  • Fixed a bug in the ST-Link support, where some writes were not completed. This lead to problems when flashing a device, as the final reset request was not properly executed.
  • Refactored 8-bit memory access in ADIMemoryInterface, fixing some edge case crashes in the process. Also rewrote all tests to be more thorough.
  • Fixed 8/16-bit memory access processing in MockMemoryAP.
  • Protocol selection for JLink now will properly honor the actual capabilities of the JLink instead of crashing if the capability was missing.
  • Fix an issue where probes would double attach to a target, potentially leading to issues.

0.5.1

Fixed

  • Fix a bug where M3 targets would not be able to load the core.

0.5.0

Added

  • Flashing support for the STM32G0 series.
  • Flashing support for the STM32F0 series.
  • Flashing support for the STM32WB55 series.
  • Support for RISC-V debugging using a Jlink debug probe.
  • Support for SWD debugging using a Jlink debug probe.

Changed

  • The entire API was overhauled. The Probe, Session and Core structs have different interaction and APIs now. Please have a look at the docs and examples to get an idea of the new interface. The new API supports multiple architectures and makes the initialization process until the point where you can talk to a core easier. The core methods don't need a passed probe anymore. Instead it stores an Rc to the Session object internally. The Probe object is taken by the Session which then can attach to multiple cores. The modules have been cleaned up. Some heavily nested hierarchy has been flattened.
  • More consistent and clean naming and reporting of errors in the stlink and daplink modules. Also the errorhandling for the probe has been improved.

Fixed

  • Various fixes

Known issues

  • Some chips do not reset automatically after flashing
  • The STM32L0 cores have issues with flashing.

0.4.0

Added

  • A basic GDB server was added \o/ You can either use the provided gdb-server binary or use cargo flash --gdb to first flash the target and then open a GDB session. There is many more new options which you can list with cargo flash --help.
  • Support for multiple breakpoints was added. Breakpoints can now conveniently be set and unset. probe-rs checks for you that there is a free breakpoint and complains if not.
  • A flag to disable progressbars was added. Error reporting was broken because of progressbar overdraw. Now one can disable progress bars to see errors. In the long run this has to be fixed.
  • Added an improved way to create a Probe.
  • Added an older USB PID to have probe-rs detect older STLinks with updated Firmware.
  • Added support for flashing with different sector properties. This fixed broken flashing on the STM M4s.

Changed

  • Code generation for built in targets was split off into a separate crate so probe-rs can be built without built in targets if one doesn't want them.

Fixed

  • Fixed setting and clearing breakpoints on M4 cores.

0.3.0

Improved flashing for cargo-flash considering speed and useability.

Added

  • Increased the raw flashing speed by factor 10 and the actual flashing speed for small programs by factor 5. This is done using batched CMSIS-DAP transfers.
  • Added CMSIS-Pack powered flashing. This feature essentially enables to flash any ARM core which can also be flashed by ARM Keil.
  • Added progress bars for flash progress indication.
  • Added nrf-recover feature that unlocks nRF52 chips through Nordic's custom AP

Changed

  • Improved target autodetection with better error distinction.
  • Improved messaging overall.

Fixed

  • Various bugfixes
  • Binaries bigger than a sector can now be flashed.

0.2.0

Initial release on crates.io

  • Added parsing of yaml (or anything else) config files for flash algorithm definitions, such that arbitrary chips can be added.
  • Modularized code to allow other cores than M0 and be able to dynamically load chip definitions.
  • Added target autodetection.
  • Added M4 targets.
  • Working basic flash downloader with nRF51.
  • Introduce cargo-flash which can automatically build & flash the target elf file.